Waste metal shredders are not a problem for thicker aluminum

As a kind of metal shredding equipment, the waste metal shredder equipment has no need to say much about its strength. Because the aluminum material is softer than other metals, the scrap metal crusher has no problem in dealing with some thick aluminum materials. Today I am You answer the principle of shredding items in metal shredder equipment:

The blades in the waste metal shredder use super-strength refined alloy knives. The blade is an intermeshing blade that forms a counter-roll type. When the metal enters the interior of the shredder, the rollers move in opposite directions to each other to shred the metal block.

When shredding is not possible, the scrap metal crusher equipment will intelligently rotate, spit out the raw material, and then bite it from the head. Until the scrap aluminum block is shredded into small pieces, it can be discharged from the discharge port,

The required material could not be reached, and the above shredding operation was carried out from the beginning. When the waste metal shredder enters the shredder bin, the scrap metal crusher equipment intelligently shreds from the thinner direction of the bill of materials, and so on, until the hardest part of the material is completely shredded and stopped.

Different models of waste metal shredders use different diameters of the blades. In principle, as long as the material ruler (length, width) does not exceed the size of the cutter box, the material can be easily shredded.

Through these understandings, I believe that everyone has a certain understanding of the crushing strength of the scrap metal crusher. Everyone must pay attention to safety in the process of using the equipment. You are welcome to consult our hotline for more common knowledge about scrap metal shredders.