How is a high quality tire shredder blade made?

Tire shredder is mainly used to break tires, making them easy to transport and recycle. We all know that the tyre shredder is a high-speed machine, so the blade is very important for the tire shredder. The development of the tire recycling machine also drives the development of the blade industry, so what equipment is needed for the tire recycling machine tool, do you understand this problem?

When the tool is produced, it needs to be unloaded. At this time, a hydraulic sawing machine is needed to cut the cylindrical steel into the desired size. Then an air hammer is needed, and the burnt charcoal is hammered into the shape of the desired shredder blade and placed in the oven to ignite. After that, the blade is roughed by a series of machine tools such as milling machine, drilling machine and lathe. After the remaining amount is released, the computer wire is cut into the desired shape, and then it is quenched and tempered in the heat treatment furnace. The tyre recycling machine tool of good material should be returned to 3-4 times.

Then use a vertical grinder to grind the surface of the machine. After leaving a few dozens of wire, cut the wire with a computer wire and cut the claws of the shredder blade. Be careful to take the wire slowly and the wire is too fast. The blade is cut, and the blade may be cut off. After the completion, the shredder tool is ground to the desired size with super-fine grinding. The precision of the ultra-fine grinding can be controlled within 0.003mm. After the completion, the stain on the blade will be clearly cleared, coated with anti-rust film and packed in wooden box. Ok, so the shredder tool can be shipped.

The blade of the tire recycling machine seems to be simple, but the production process is very complicated. It has more than a dozen machine tools, so that the blades produced can be used more comfortably.The quality of blade of tyre recycling machine also enhances the output of tire recycling plant.