The internal structure of the metal crusher determines its degree of fragmentation

The internal structure of the scrap metal crusher and the material of the blade determine the thickness at which the waste metal shredder can be pulverized. The blades in the scrap metal crusher are graded alloy tools. The knife is an engaging blade that forms a pair of rollers.

When the metal enters the inside of the waste metal shredder, the rollers move in opposite directions to each other, and the metal crusher can break the metal block. After the metal block is chopped into small pieces, it can be discharged from the discharge port into the screen, and the above-described chopping operation is repeated for materials that do not meet the requirements.

As the material enters the shredder bin, the waste metal shredder intelligently shreds from the weak material, and so on, until the hard portion of the material is completely shredded.

Different types of metal crushers are equipped with different blade diameters. The metal crusher material enters the interior of the crushing cabinet through the feeding system, and the box body is provided with a grinder blade. The crusher blade cuts the material, extrudes, shears, etc., and cuts into small pieces of material.

In principle, the shredding work can be easily cut as long as the material size does not exceed the size of the feed bin.

Scrap metal materials are relatively hard and are not easily shredded compared to other materials. Therefore, the structure of the metal crusher is different from that of other crusher equipment. The crusher is driven by a motor and is equipped with a metal crusher with a reducer.

High-hardness metal materials have higher requirements on the quality of the machine. We have been serious about the selection of internal structural parts of the crusher.