How does the metal shredder work?

Yuxi Machinery is a manufacturer specializing in the production of shredder series in China. How does the scrap metal crusher work?

The shredder blade is the main force for the material of the scrap metal crusher. Because the cutter is mostly an alloy head, the alloy head is mainly protected during installation or movement to avoid damage.

 

The waste metal shredder blade must be properly tightened during installation. If it is too loose, it is easy to slip and reduce the work efficiency when it is rotated. If it is too tight, it will easily cause unnecessary damage such as blade deformation. After the idler idles for half a minute, make sure that the machine has no abnormal noise and normal operation.

During the operation of the scrap metal crusher, the material is placed in the double-shaft shredder chassis through the feed port, and the pushed material is torn and cut by the double-shaft shredder blade, and the large material is shredded into small pieces. The block, which meets the specifications, is screened out from the mesh hole. If the particles are relatively large, it will be returned to the chassis and a new round of grinding will be started until the requirements are met.

Yuxi Machinery has dozens of series and hundreds of kinds of mechanical products, fine workmanship, superior quality, long-term exchanges and cooperation with overseas countries, not only make Yuxi Machinery Equipment Co., Ltd. always high international level, and It has won a wide range of international markets and its products are exported to Russia, Kazakhstan, Azerbaijan, Turkey, Kuwait, South Africa, Egypt, Vietnam, Malaysia, India, Australia, North Korea, Canada and the European Union.