How to improve the service life of tire shredder tools?(3-6)

Fourth, the broken material is subjected to iron removal treatment

The tool of the tyre shredder is designed and customized according to the material of the tire. If the raw material contains other metal materials, after entering the tire crusher, the tool will be damaged. Before the crushing, the raw materials should be filtered to remove impurities. Not only can improve the service life of the tool, but also improve the quality of the broken material;

Fifth, the correct operation of the equipment

The tyre recycling machine should be operated in strict accordance with the operation procedure. The equipment maintenance or knocking of the tool should not be carried out during the working process of the equipment. Once the equipment is abnormal, it should be stopped immediately. Before going to work, the material in the crushing room should be crushed and then shut down. Before the work, the tire shredder should be operated for a few minutes after the empty load operation.

Sixth, do daily maintenance work

Before and after work, check whether the equipment is loose or damaged, check the tool for cracks or deformation, and start the machine when the equipment is in normal condition.

The above are several precautions and methods for how to improve the service life of the tire recycling machine tool by Yuxi Machinery. The operator should do the daily maintenance and repair work, mainly for prevention and repair. Once the tool is found to be damaged or worn out, it should be repaired first and replaced without repair value.