Knowledge about tire shredder blades

Pulverizing material this all depends on is the cutter so the cutter's quality directly determines the shredding machine's quality.First of all, different brands of tire shredder blades choose different materials.

Therefore, it is necessary to pay attention to the quality of the materials selected.Generally, the harder the blade, the better the quality.

The second is to see whether the blank has been forged or not. Only by using this technology can the blade be made so that the density of steel atoms can be closer together.Moreover, a good blade is also very accurate in the precision of the processing equipment. Generally speaking, it must be within the tolerance range of the blade.

Then the installation process of shredding machine blade, after moving the oil pump, when the slider rises to the upper dead point, close the oil pump, install shredding machine blade, use the M12*45 hexagon socket screw, and then use the wood rod to press the blade, make the lower blade and the lower blade joint surface on the work table completely fit, tighten the screw.

An important way to influence heat transfer of shredding machine blade is to produce excellent chip.

Chip can take away the heat generated by cutting, only a small amount of heat can enter the workpiece, and a small amount of heat is transferred to the tool and other local areas.The new chip slot is pressed into the tool surface to help control the shape and size of the chip.

The chip groove designed for shear band chip data is helpful to solve this problem.

Although the cutting edges have large front and front angles, they are not as brittle as wet machining.The inherent high cutting temperature of dry cutting can make the hard alloy soften slightly, improve its toughness, reduce the possibility of slight collapse and improve the tool life.

For the same reason, replacing a harder tire recycling machine blade in dry cutting will rarely reduce tool life or cutting consistency.

In fact, quite the opposite.The harder base ensures the cutting edge integrity at high temperatures, while the finer softening prevents the cutting edge from becoming too brittle.

Thus, the user may specify a harder grade of the carbide to improve its resistance to deformation and crescent concave wear (chemical dissolution of the cutting edge).Otherwise, dry cutting will greatly shorten the tool life.

Yuxi Machinery Equipment Co., Ltd. is a manufacturer of professional tire shredder and tire recycling machine. The tire recycling machine produced by our company has been exported to America, Europe, Southeast Asia and other countries and regions, and has received wide acclaim.