What should we pay attention to when using a metal shredder?

waste metal shredder is a machine composed of crushing knife roller system, bearing case, feeding system, power system and electronic press system.

Waste metal shredder is mainly used for crushing coarse and hard garbage, reducing its volume and saving space for transportation and recycling, such as construction materials, waste furniture and electronic garbage.

It has the characteristics of saving transportation cost, saving landfill cost, recycling and reusing waste after crushing.Below to tell you about the shredding machine when the use of attention:

1. Precautions before use:

A. check the tightness of screws in each part;

B. rotate the belt pulley by hand to see whether the material is stuck in the torn cavity;

C. whether the lubricating oil in each bearing position is filled.

2. Precautions in use:

A. Inflammable and explosive materials are prohibited;

B. no one is allowed to stand before the feeding port;

C. the staff must be equipped with a safety helmet during the operation of the equipment;

D. In case of overload carrier, the feeding speed shall be slowed down to prevent overload carrier from bringing safety risks to the motor.

3. Matters needing attention after shutdown:

Before the scrap metal crusher is shut down, the equipment should be idle for two minutes, and the torn objects in the torn cavity should be completely removed to prevent problems in the second start up.

Check the motor temperature and bearing temperature before work.Check the tightness of the belt.Check and replace hammer head and blade as necessary.

The waste metal shredder produced by Yuxi Machinery is made of high-strength steel, which can effectively shred high-hardness iron products, has good shredding effect, large output and low investment cost.