The basic principle of the metal crusher

Motor driving the wind wheel is squeezed. The core principle is the basic principle of hammer hitting. The loading port is equipped with a filter belt.

Under the drive of high speed and large torque motor, the hammer head on the main rotor The object to be crushed into the cavity is alternately struck, and the object to be crushed is torn into a crushed product according to the specification through a space formed between the lining plate and the hammer head.

The waste metal shredder can be divided into a dry system, a wet system, and a semi-wet system according to the working condition of the crusher.

The dry system mainly means that the crushed material must pass through the air cyclone sorting system to separate the metal from the non-metal, and the whole system is equipped with a dust removing device.

A wet system refers to water spray while being crushed, and is rinsed while being sorted. These advantages of scrap metal crusher can meet the basic requirements of electric steelmaking for concentrate steelmaking and shortening smelting time to the greatest extent; and pure broken steel can also be used as additive for converter steelmaking.

The crushed material is separated from the metal and non-metal by the air cyclone sorting system, and the whole system is equipped with a dust removal device to minimize the dust pollution hazard generated during the production process.

The scrap metal crusher mainly has the advantages of high output, low energy consumption, high efficiency, uniform discharge and fineness. Moreover, when the device is used, the noise is low, pollution-free, and the operation is simple and the maintenance is convenient.

In addition to metal shredders, Yuxi Machinery also produces tire shredder and tire recycling machine. The recycling machines produced by our company are made of high-strength steel, with high quality, large output and reasonable price. It is your best choice.