Daily maintenance knowledge of the reducer of the double shaft tire shredder

Double shaft tire shredder is mainly used for crushing scrap metal, increase its density for transport, recycling.

Two-axis tyre shredder can be used to break the above waste materials, some can be made into particles (waste rubber, tires), some can be made into sawdust (waste furniture, waste wood), some can be made into recycled paper (waste newspaper, waste carton).Double shaft shredder is through shearing, kneading, crushing and other methods of crushing these materials, crushing particle size can be arbitrarily adjusted.

So how much do you know about the daily maintenance of the reducer of tire shredder ?

Knowledge of daily maintenance of reducer of two-axis shredding machine:

1. The fastening reliability of each fastener and whether the wiring of the oil pump is correct;

2. Whether the coupling protective cover, grounding wire and other protective devices are installed;

3. Check the cleanliness of lubricating oil once a month and replace it in time if it becomes dirty or deteriorated;

4. After the initial operation of the reducer for 300 hours, the lubricating oil should be replaced;

5. Clean breathable cap and oil station filter once a month to remove sundries in the filter;

6. Check whether the connection bolts between the motor and the reducer are fastened every month;

7. Check whether the connection bolts between the motor and the reducer are fastened every month;

8. Check whether the oil level, oil temperature and oil press