The quality of the shredder wear parts is important

The tire shredder works by using a motor to drive the rotor in the main chamber to rotate at a high speed, breaking the tire at a high speed into the size and shape required by the customer, and leaking from the screen to collide with the peripheral shield on the wall of the machine.

Because of the many contact with the material, the liner and hammer of the shredder are common wearing parts, which are the parts that wear out quickly. Therefore, the quality of the wear parts is good or bad, which directly determines the service life and production quality of the tyre shredder!

The tire shredder manufacturer Yuxi Machinery reminds the texture of the material and the use time of the wearing parts is not proportional, that is to say, if the wear parts break the fragile material, the use time will be prolonged, on the contrary, the harder materials, The damage to the wear parts is very large.

Therefore, when choosing a shredder, be sure to pay attention to the material of the wear parts. The wear parts of the same shape may be separated by thousands of miles depending on the material and the manufacturing method.

Generally, formal enterprises, the parts used, especially the key parts of the parts, use better quality and higher production process, although the price may be higher and the cost is high, but for customers who want to develop for a long time. Is a good choice. The shredder with unreasonable design will greatly reduce the service life of the wearing parts. Therefore, the quality of the wear parts directly affects the quality of the shredder.

    Yuxi Machinery use Various high standard special steel to make our tire shredder:

V Blades Material:D2(Baosteel), SKD-11(Hitachi), XW-42(ASSAB)，42CrMo(Xingcheng Special steel), etc.

V High-Rupturing Capacity: HRC 55~58

V Heating Treatment: Bodycote (UK)