What is the difference between 4M Waste Tire Tread Cutting Machine&3M Waste Tire Tread Cutting Machi

3M Waste Tire Tread Cutting Machine

Motor power 60kw (cutting knife diameter 650mm with 6 sets of rotary table with different caliber) sidewall cutting time is 5 minutes / piece, external dimensions 4500mmX1600mmX1800mm.mechanical weight 3 tons

4M Waste Tire Tread Cutting Machine

Motor power 110kw (cutting knife diameter 800mm) tire cutting time is 8 minutes / strip; Dimensions of 4500mmX4500mmX1600mm mechanical weight tons.

Instructions

Turn on the power, first start the main motor, and wait for the motor to run normally, ready to feed;
The operator puts the tire top of the cut tire on the rotating roller, starts the slitting machine, starts the hydraulic expansion wheel, and automatically enters the cutting edge with the spinning pressure of the expansion wheel, and automatically cuts the rubber strip around the cutter. Rotary shearing An operator's rubber strip cut out by the slitter is placed in the feeding port of the cutting machine. The cutter will automatically eat and cut into small pieces of 35mm thickness. Keep the hand too close to the tool to keep the distance of 50cm or more. When one strip is cut, re-enter another strip, and then cycle.

Waste Tire Tread Cutting Machine is one of the important stand-alone machines for tire recycling machine and plays an important role in the tire recycling machine.

Zhengzhou Yuxi Machinery Equipment Co. , Ltd. is specialized in designing, researching, producing waste recycling equipment and provide waste treatment solutions.

Yuxi factory has been working closely with well-known foreign enterprises to establish a good relationship between technical cooperation and market development. at the same time, 32 patents and 3 invention patents have been obtained.

Yuxi Machinery uses a physical crushing method to produce a fully automatic tire shredder line, which is an efficient way to recycle tires.