Lubrication of tire shredder bearings is also critical

The spindle acts as a substitute in the tire shredder equipment.

After using a tire shredder for a period of time, the spindle will shift to some extent or there will be gaps or even tortuosity.

The tortuosity of the spindle not only shortens the service life of the bearing and the spindle, but also brings a lot of trouble to the machine's usual shredding operation.Inaccuracies or tortuosity of the spindle may cause the blades to rub against each other, causing the blade to wear unnaturally, which seriously affects the service life of the blade and affects the processing scale of the material.

Therefore, the lubrication of the tire shredder bearings is also critical.Good lubrication not only enables the shredder equipment to function properly, but also extends the life of the shredder.Ensure that the lubricant is clean and sealed when injecting lubricant.

In addition, it is necessary to regularly add the lubricating oil according to the instructions of the tire shredder.Lubricating oil accounts for about 70-80% of the shredder bearing space, too much or too little is not conducive to the heat transfer of the shredder bearings.

If there is too much smoothing agent added in the tire shredder,the power generated by the motor is not well transmitted to the shredder's broken parts,but this part of the force acts on the smoothing agent, making the smoothing agent hot.This heat is accumulated in the machine and can easily cause damage to the shredder.

If the tire shredder's bearings add too little smoothing agent, the inside of the tire shredder will be damaged due to the conflicting parts.

The lubricant of the tire shredder should be controlled to about one-third of the internal space of the machine. This is the proper dose, which can make the shredder run longer and bring greater economic benefits to the enterprise.