What preparations do the tire shredder need before use?

    Generally, before the tire shredder is turned on, a simple check is needed to see if the tire shredder has external interference effects, and whether the various parts are normal, avoiding abnormalities after starting the machine and affecting personal safety.

 

When the tire shredder is turned on, the machine is in no-load state, that is, it must be warmed up first, and then the filler can be started after the normal rotation speed.

After the preheating of the tire shredder itself, the operation effect will be better.

 

For fastening, for example, the sieve part should be installed firmly, the sealing part should be done well, the bolt fastening should be in place, and no leakage will occur.

Avoid problems during the operation or abnormal noise.

 

In short, when using the tire shredder, it is necessary to check and operate the above aspects before starting the machine to ensure the normal operation of the equipment.

 

In addition, during the operation, if there is a bearing or the motor is abnormally hot, it is necessary to stop the feeding and check the problem. If it is serious, you need to contact the factory personnel for disposal.

 

Please pay attention to us for more details.

 

Yuxi Machinery ------ tire shredder and recycling line professional manufacturer