What if the blade of the shredder is blunt?

What if the shredder cutter is stewed? We all know that the shredder is mainly shredded by the internal blade, so that the blade is attributed to the consumables.

If the shredder blade is not replaced in time after being stewed, the shredded material will have uneven particles and affect the effect. However, some customers think that this new solid blade will be replaced, and more regrets. Today we will teach you how to grind the shredder blade so that it can be used twice.

The grinding of the shredder blade is not the same as the grinding of other blades. Other types of mechanical blades basically use the grinding machine to grind the plane or the edge portion, and the shredder prop construction is more special. The equipment of the claw edge makes it impossible to grind the grinding machine. The flat grinding of a single blade causes the gap between the blades to be too large, which seriously affects the application. The wear of the blade is mainly the wear on the claw. The simplest method of grinding is to polish the inner side of the cutting edge with a polishing machine until the edge is sharp. In the process of grinding, it must be noted that it must be polished along the arc of the blade, and must be straight with the plane, so the loss of the original blade is the smallest. So the tool is stewed without panic, try this method.